Skip to main content

Duralox 997 Ceramic Thermocouple Tubes

 Duralox 997 re-crystallized alumina can be used up to 1800 0C. It is particularly suitable for use as an insulator for rare metal thermocouples, due to its very low silica content; This ensures that there is no contamination of rare metals such as platinum with silicon. Duralox 997 alumina closed one end ceramic thermocouple tubes or single and multi bore tubes are vertically sintered at approximately 1750 0C in a microprocessor controlled bell type oxygen atmosphere. After sintering, 100% thermocouple tubes are tested under 4 bar air pressure to ensure gas tightness.





Duralox 997 single and multi bore tubes and insulators are used to insulate thermocouple wires suitable for a maximum temperature of 1800 0C as per DIN 43725 standards. Tube sizes other than those shown in the table above can be made on request if possible. Dimensional tolerances are maintained according to DIN 40680 medium class standards.


Multibore Tube is exceptionally high purity Alumina Ceramic

Physical Strength : Duralox 997 Alumina is very hard with high mechanical strength and resistance to abrasion and corrosion and a good thermal conductor at high temperatures.



Impermeability : Duralox 997 Alumina products are fired at very high temperatures around 1750 0C which ensures impermeability under severe and severe conditions.



Good Electrical Resistivity : Duralox 997 Alumina maintains good electrical resistivity at high temperatures.



High Heat Conductivity : Duralox 997 Alumina products are considered high-tech products and are manufactured with advanced technology, hence maximum density is ensured with minimum wall thickness. It provides maximum possible heat transfer.



High Temperature Stability and Chemical Inertness : Duralox 997 is inert even at high temperatures due to the low silica content of its residue to reduce atmospheric and flux attack.



Product range : Duralox 997 Alumina product range includes closed one end (COE), open both ends (OBE), tubes with single and multibore tubes, thin-walled tubes, capillary tubes, round and oval rods above Ø 0.5 mm. .



Amphoteric : Duralox 997 Alumina is highly resistant to acid slugs.


Capillary Tubes Made of High-Performance Ceramic Multi-Bore Capillaries Despite their thin wall-thickness for measurement and control processes, the dimensional stability of ceramic capillary tubes remains intact. Thermocouple elements can be electrically insulated to the point of measurement by dual or multi-bore capillaries made of aluminum oxide ceramics. Multibore tube capillary for measurement and control process.


For More Information Please Visit us at: https://www.jyoticeramic.com/pyrometry_tubes.php

Call us: 02532365766 , 2350120 / 338 / 729, 2351251

Watch us: https://www.youtube.com/watch?v=Ln-zV37d700


Comments

Popular posts from this blog

Zircosil - Zirconium Silicate Micro Milling Media

Zircosil is the registered name of Jyoti Ceramic Industries Pvt. Ltd. for their proprietary formulated Zirconium Silicate composite, specially developed for upper medium density (4.4 g/cm3) ceramic micro milling beads used for wet milling/dispersion of formulation Looking at the market needs for medium density, long-lasting, cost-effective ceramic milling beads, we started an extensive research to develop suitable ceramic milling beads to the specific segment of customers who have bead mills but not suitable to carry the load of Zirconox high density (6.2 g/cm3) beads. We finally developed Zircosil ceramic micro milling beads formulated from microfine fused Zirconium siicate powder sintered at high temperature. Generally, for dispersion or particle size reduction of substances, ceramic-glass beads are used world over in bead mills, pearl mills or in agitating attritor mills Zircosil - Zirconium silicate beads can conveniently replace glass and most of ceramic beads due to it...

Jyoti Ceramic: Pioneering Excellence in Ceramic Protective Coating for Unmatched Durability

  In the ever-evolving landscape of industrial coatings, Jyoti Ceramic stands as a beacon of innovation, redefining the standards of protection with its state-of-the-art Ceramic Protective Coating . Specializing in creating coatings that are both Corrosion and Abrasion Resistant Coating , Jyoti Ceramic has become synonymous with durability, reliability, and unmatched performance in diverse industrial applications. Ceramic Protective Coating: A Technological Marvel: At the core of Jyoti Ceramic's success is its cutting-edge Ceramic Protective Coating technology. This advanced coating is designed to provide a robust shield against the dual challenges of corrosion and abrasion, ensuring that critical equipment and assets remain protected even in the harshest environments. Corrosion and Abrasion Resistant Coating: The Need of the Hour: In industries where equipment is constantly exposed to corrosive elements and abrasive forces, the need for reliable protective coatings cannot...

Enhancing Shunt Reactor Performance with Steatite Ceramic Spacers

  In the realm of power distribution and grid management, the role of Shunt Reactors cannot be overstated. These essential devices play a pivotal role in maintaining voltage stability and grid reliability. Behind the scenes, one critical component that often goes unnoticed but is instrumental in ensuring the optimal performance of Shunt Reactors is the humble " Ceramic Spacer ." Among the various materials used for these spacers, steatite ceramic stands out as a preferred choice for its exceptional electrical and thermal properties. Join us as we delve into the world of Shunt Reactors and explore the significant role of steatite ceramic spacers, as well as the reliable ceramic spacer manufacturers that supply them. The Power of Shunt Reactors: Shunt Reactors are a cornerstone of modern electrical grids. They are specifically designed to compensate for capacitive reactive power in the transmission system, ensuring voltage stability and preventing voltage rise during light-loa...