Skip to main content

Recrystallized Alumina Ceramic Thermocouple Tubes

Duralox 997 Re-crystallized Alumina can be used up to a temperature of 1800 0C. It is particularly suitable for use as an insulator for rare metal thermocouples, because of its extremely low silica content ; it ensures that there is no contamination of rare metals such as platinum with silicon. Duralox 997 alumina closed one end Ceramic Thermocouple Tubes are sintered vertically at approximately 1750 0C temperature, in oxygen atmosphere in microprocessor controlled bell type kiln. After sintering, 100% thermocouple tubes are tested under air pressure @ 4 bar to ensure gas tightness.

Ceramic Thermocouple Tubes

These tubes are produced under the severe management of our specialists utilizing top notch unrefined substances. To meet the fluctuated needs, we offer these items in various sizes and determinations to the clients. Some of the acclaimed features of the offered range of these rods are enlisted below:

  • Dimensional accuracy
  • Longer life
  • Low maintenance
  • Fine finish
  • Extruded Ceramic Filter
  • Improved casting quality
  • Improved machinability of castings
  • Improved yield

ceramic thermocouple tubes

A wide combination of Ceramic Thermocouple Tubes is Jyoti Ceramic offered by us to customers at market leading costs. These tubes are highly appreciated for their different purposes such as in applications where contamination from hostile environments or the cutting action is concentrated. Ceramic thermocouple tubes are available in a variety of sizes and materials with crystallized alumina, mullite, and zirconia being the most commonly used.

Ceramic Thermocouple Tubes Advantages :

Duralox 997 Re-crystallized Alumina Ceramic offers following advantages over the metals :

  1. Continuous high temperature resistance 17500C.
  2. Higher thermal stability.
  3. Lower thermal expansion.
  4. Inert to Hydrogen, Carbon and refractory metals under most severe conditions, non-toxic, non-radioactive, non-magnetic and non-aging.

Ceramic thermocouple tubes designed to protect sensors and ensure reliable and long-term operation by being closed at one end, for use in a wide range of applications and industries. 

Jyoti Ceramic provides Duralox 997 Alumina product range that includes ceramic thermocouple tubes open and close options at both ends, for use in industrial sensors and high-tech products and are manufactured with advanced technology, therefore maximum density is ensured with minimum wall thickness.

For More Information Please Visit us at: https://www.jyoticeramic.com/pyrometry_tubes.php Watch us: https://www.youtube.com/watch?v=Ln-zV37d700


Labels:
Location: India

Comments

Post a Comment

Popular posts from this blog

Zircosil - Zirconium Silicate Micro Milling Media

Zircosil is the registered name of Jyoti Ceramic Industries Pvt. Ltd. for their proprietary formulated Zirconium Silicate composite, specially developed for upper medium density (4.4 g/cm3) ceramic micro milling beads used for wet milling/dispersion of formulation Looking at the market needs for medium density, long-lasting, cost-effective ceramic milling beads, we started an extensive research to develop suitable ceramic milling beads to the specific segment of customers who have bead mills but not suitable to carry the load of Zirconox high density (6.2 g/cm3) beads. We finally developed Zircosil ceramic micro milling beads formulated from microfine fused Zirconium siicate powder sintered at high temperature. Generally, for dispersion or particle size reduction of substances, ceramic-glass beads are used world over in bead mills, pearl mills or in agitating attritor mills Zircosil - Zirconium silicate beads can conveniently replace glass and most of ceramic beads due to it...
1 comment
Read more

Zircoat Refractory Coatings

 Zircoat Refractory Coatings ZIRCOAT is zirconia rich, high temperature, erosion / corrosion resistant ceramic water - based refractory coating compound, which is available in two grades; ZIRCOAT-HT and ZIRCOAT-M respectively. Zircoat is the outcome of the untiring efforts put in by our scientists and technicians, backed by a state-of-the-art R&D laboratory. Zircoat marks the development of a unique Zirconia Ceramic Refractory Coating compound, which will prove greatly beneficial to the industries where erosion/corrosion is a severe and chronic problem for refractories and kiln steel shells. Main Characteristics & Advantages Of Zircoat ·         Easy to apply by trowelling, brushing or spraying ·         Good adhesion to metals, refractory bricks, monolithics, castables and ceramic fibre modules, molten metal, graphite /carbon crucibles etc. ·         Go...
Post a Comment
Read more

High quality of ceramic spacers for shunt reactor.

  Shunt reactors are the most compact & cost eļ¬ƒcient means of compensating capacitive generation in long transmission high voltage power lines & extendable systems. Shunt reactors are either series reactors or compensating reactors that are used as an inductive load to control the voltage and provide reactive power compensation. The best and most renowned technology is an iron core design with air gaps, in which only a few suppliers have a lot of experience and expertise. The core is made from radially laminated iron packages, while ceramic spacers ensure precise compliance with the specific air gap requirements. The machining of the ceramic spacer is difficult and expensive, and the assemblage of the core leg segment by segment is very time-consuming. The heart of every Shunt reactor is its core. Precisely ground Ceramic Spacer is the key to manufacturing a high-quality core. Jyoti Ceramic has a strong commitment to conserve energy and reduce costs of manufacture while...
Post a Comment
Read more