Skip to main content

Ceramic Composite Panel for Absorbing High Impact Resistant

 


Alu-Serra polymer panels are a new generation of ceramic composite panels, a combination of vulcanized sapphire hard abrasion resistant alumina ceramic cylinders / ceramic tiles in a flexible rubber base. While sapphire provides exceptional resistance to wear on hard ceramic surfaces, the elastic properties of rubber effectively moisturize impact forces that can cause the ceramic to crack. Rubber also helps reduce the impact of vibrations, noise, and impact rocks.

Arranged in zigzag and brick patterns, ceramic tiles/cylinders are an excellent feature for handling large amounts of material from different angles without developing a wear pattern.

Applications: Feeders, chutes, bins, transfer points, conveyor systems, screen feed plates, mill discharge chutes, bunkers, etc.



MAX APPLICATION TEMPERATURE 80°C / 176°F.

Major industries: coal-fired power plants, cement plants, blast furnace plants, and other industries which require high-impact abrasion-resistant surfaces.

Size:

Alu-Serra composite polymer panels are available in various sizes. Ceramic-composite panels are available from 10mm x 10mm to 100mm x 150mm; Ceramic tile thickness can range from 1.5 mm to 50 mm.

The panel sizes are supported by alloy plates with thicknesses from 100 mm x 100 mm to 500 mm x 500 mm, thicknesses from 3 mm to 10 mm. Depending on the size of the panel, the steel backplate is welded with one or two numbered MS CSK.M16 BOLTS 45mm long MS washers and nuts. The thickness of the rubber depends on the expected stress.


Advantages of using ALU - CERA polymer panels:

1. Insert sapphire hardened and resistant ceramic tile/cylinder panel

2. Installation friendly so reduces downtime

3. Excellent sound insulation

4. Use in different sizes, thicknesses, and shapes as per special requirement
Labels:

Comments

Post a Comment

Popular posts from this blog

Zircosil - Zirconium Silicate Micro Milling Media

Zircosil is the registered name of Jyoti Ceramic Industries Pvt. Ltd. for their proprietary formulated Zirconium Silicate composite, specially developed for upper medium density (4.4 g/cm3) ceramic micro milling beads used for wet milling/dispersion of formulation Looking at the market needs for medium density, long-lasting, cost-effective ceramic milling beads, we started an extensive research to develop suitable ceramic milling beads to the specific segment of customers who have bead mills but not suitable to carry the load of Zirconox high density (6.2 g/cm3) beads. We finally developed Zircosil ceramic micro milling beads formulated from microfine fused Zirconium siicate powder sintered at high temperature. Generally, for dispersion or particle size reduction of substances, ceramic-glass beads are used world over in bead mills, pearl mills or in agitating attritor mills Zircosil - Zirconium silicate beads can conveniently replace glass and most of ceramic beads due to it...
1 comment
Read more

Zircoat Refractory Coatings

 Zircoat Refractory Coatings ZIRCOAT is zirconia rich, high temperature, erosion / corrosion resistant ceramic water - based refractory coating compound, which is available in two grades; ZIRCOAT-HT and ZIRCOAT-M respectively. Zircoat is the outcome of the untiring efforts put in by our scientists and technicians, backed by a state-of-the-art R&D laboratory. Zircoat marks the development of a unique Zirconia Ceramic Refractory Coating compound, which will prove greatly beneficial to the industries where erosion/corrosion is a severe and chronic problem for refractories and kiln steel shells. Main Characteristics & Advantages Of Zircoat ·         Easy to apply by trowelling, brushing or spraying ·         Good adhesion to metals, refractory bricks, monolithics, castables and ceramic fibre modules, molten metal, graphite /carbon crucibles etc. ·         Go...
Post a Comment
Read more

High quality of ceramic spacers for shunt reactor.

  Shunt reactors are the most compact & cost efficient means of compensating capacitive generation in long transmission high voltage power lines & extendable systems. Shunt reactors are either series reactors or compensating reactors that are used as an inductive load to control the voltage and provide reactive power compensation. The best and most renowned technology is an iron core design with air gaps, in which only a few suppliers have a lot of experience and expertise. The core is made from radially laminated iron packages, while ceramic spacers ensure precise compliance with the specific air gap requirements. The machining of the ceramic spacer is difficult and expensive, and the assemblage of the core leg segment by segment is very time-consuming. The heart of every Shunt reactor is its core. Precisely ground Ceramic Spacer is the key to manufacturing a high-quality core. Jyoti Ceramic has a strong commitment to conserve energy and reduce costs of manufacture while...
Post a Comment
Read more